| Humidaire Company, Inc |
Phone: 215-467-4646 Fax: 215-467-1667 |
|
Pillow Block Sleeve Bearings Heavy neoprene cushioned. Re-oilable porous bronze bushing in a pressed steel ball unit held firmly in a housing of two- piece interlocking steel. self aligning, static free and quiet operating. This high quality pillow block will assure many years of trouble-free performance. |
|
Sealed Type Ball Bearings with insulator For use where operating conditions exceed the limits of sleeve bearings or where repetitive failures occur. These bearings are pre-lubricated at the factorry and require no further lubrication or attention. They are equipped with seals for positive grease retention and protection against contaminants. normal operating temperature is from -30 deg F to 200 deg F. |
|
|
Flange Ball Bearing Permanently sealed and lubricated, two - bolt flange unit, rubber mounted oil-resistant, rubber isolator. Stamped steel housing. |
|
Pillow Block Ball Bearing Temperature Range -30 to 200 deg F
|
|
|
Thrust Sleeve and Spacer Kit Developed to eliminate end play on sleeve bearing blowers. Replaces old style spring design. Plastic sleeve with assortment of spacers make adjustment easy on any size blower. Easy-to-follow instructions included. Available in 3/4" shaft size. |
| Thrust Collar Kit>BR> Sheet metal thrust collar in 3/4", 5/8", and 1" size. All with hollow head set screws. Kit cinsists of one pair packaged with thrust washers. |
|
